programing to a Vista 20p

This is a fine product and is easy to program into the Vista series of controllers as long as you don't read the instructions in the manual. I spent 8 hours pouring over the online installation and user manuals trying to write a list of programming commands to set up this key. After finishing my research, I still had several unanswered questions. So, I attempted to program the key using the two pages in the manual including using the templates supplied in the manual. The key did not work. The Vista 20p would not recognize it... So, after watching a couple of YouTube videos of the key being programed, I deleted all that I had programed about the key and started over. The simple solution; program the key as any other wireless device as long as you have at least four empty slots. Set up the device as a wireless button device and 'learn in' the address by pressing the 'arm' button. Confirm the address by pressing the same button. This needs to be repeated for each button that you plan to use. And it works... no need for templates etc.. After finding the Zn number for a button wireless device, the rest was as easy as programming any other wireless device.. after properly programming the device, it works great. So far, no issues ..

Verified purchase: Yes | Condition: new | Sold by: danweiss